DammamPlastics manufacturing
Zamil Plastics
The lap grid and valley lines sealed with EPDM at Zamil Plastics, with every section flood-tested.
View projectReal roofs, real site photos. 20 documented EPDM waterproofing projects for factories, warehouses and commercial buildings in Dammam, Al Khobar, Riyadh and Bahrain, each showing the exact failure points we sealed.
B&R Gulf, DammamShowing 20 of 20 projects
DammamThe lap grid and valley lines sealed with EPDM at Zamil Plastics, with every section flood-tested.
View project
DammamValley gutters, ventilators and HVAC-platform junctions waterproofed across ATCO's East & West factories.
View project
RiyadhTurbine ventilators, skylights and sheet laps sealed with EPDM on an industrial roof in Riyadh.
View project
DammamA full grid of side laps and end laps sealed with EPDM across a large industrial roof.
View project
DammamParapet gutters, the ridge line, laps and fasteners sealed across a long-span roof, then water-tested.
View project
BahrainBox gutters, outlets and pipe penetrations lined and sealed with EPDM for Kanoo in Bahrain.
View project
BahrainFlue stacks, parapet gutters and service penetrations sealed with EPDM for Lulu in Bahrain.
View project
Al KhobarWall-cladding flashings, skylights, laps and fasteners sealed with EPDM in Al Khobar.
View project
DammamWide valley gutters and parapet edges lined with EPDM across a multi-bay industrial roof.
View project
DammamPipe and duct penetrations individually collared with EPDM on a hygiene-products factory.
View project
DammamLaps, gutter lining and damaged-sheet repairs on a Dammam warehouse, with every zone flood-tested before handover.
View project
DammamA corroded metal roof over a bottled-water facility brought back into service with EPDM and proven with a flood test.
View project
DammamExhaust-stack penetrations, rusted sheets and ridge lines waterproofed with EPDM on a live factory roof.
View project
DammamExhaust hoods, gooseneck vents, parapet junctions and laps waterproofed with EPDM.
View project
DammamRusted AHU curbs, support frames, ridge lines and fasteners sealed with EPDM.
View project
DammamCowl vents, exhaust hoods, skylights and the ridge sealed with EPDM on a radiator factory.
View project
DammamA large-span plant roof with end laps, the full ridge line and skylights sealed with EPDM.
View project
DammamSupport-leg and wall-bracket penetrations sealed with EPDM, then flood-tested across the roof.
View project
DammamEnd laps, rusted screw heads and steel support penetrations sealed with EPDM on a working electrical factory.
View project
DammamA box gutter fully lined, plus vent pipes and wall penetrations sealed with EPDM for a printing facility.
View projectMost of ETCE's documented work is in Dammam's industrial areas, within easy reach of our head office, with further projects in Al Khobar, Riyadh and across the causeway in Bahrain. The buildings range from single-skin warehouse sheds to large multi-bay factories, but the leak sources repeat: end and side laps, fasteners, gutters, skylights and roof penetrations.
Each project page shows the site photos and the specific failure points we sealed with EPDM membrane and Promax Bonding Adhesive. Looking for a contractor in your city? See waterproofing in Dammam, Al Khobar, Dhahran, Jubail and Riyadh.
Send us a few details and an engineer will call within 24 hours. We survey the roof, trace every leak path and give you a written, photo-documented report with an itemised quotation, free and with no obligation.
ETCE is a metal roof waterproofing company in Saudi Arabia, based in Dammam. We seal warehouse, factory and hangar roofs with EPDM, backed by up to a 15-year warranty.